Brushless motors are usually described by a four-digit number such as 2207, 2806.5 or 5010, followed by a KV rating. Those numbers tell you a lot about the motor before you see a thrust table. In this guide we explain brushless motor sizes: what the numbers mean, how stator width and height affect performance, and which motor sizes suit which drones.
What the four-digit number means
The number describes the stator, the fixed inner part of the motor that carries the copper windings:
- The first two digits are the stator diameter in millimeters.
- The last digits are the stator height in millimeters.
So a 2207 motor has a stator 22 mm wide and 7 mm tall. A 2806.5 motor has a stator 28 mm wide and 6.5 mm tall. A 5010 motor has a stator 50 mm wide and 10 mm tall.
Note that this describes the stator, not the outer size of the motor, which is a few millimeters larger. Some manufacturers use the outer size instead, so always check the datasheet.
Width vs height: why the shape matters
Two motors can have a similar stator volume but behave differently:
- Wider, shorter stators (for example 2806) have more leverage, which helps produce torque. They are good at turning larger propellers smoothly and often cool well.
- Narrower, taller stators (for example 2207 compared with 2306) can respond quickly and suit fast, aggressive flying on smaller propellers.
In general, a larger stator volume means more torque and more power, but also more weight. The right motor balances power and weight for your propeller and flying style.
Common motor sizes and their uses
| Motor size | Typical propeller | Typical use |
|---|---|---|
| 0702 – 0802 | 31–40 mm | Tiny whoops |
| 1103 – 1404 | 2–3.5 in | Micro quads, toothpicks, small cinewhoops |
| 2004 – 2207 | 4–5.1 in | 5-inch freestyle and racing |
| 2306 – 2306.5 | 5–5.1 in | 5-inch freestyle, heavier 5-inch builds |
| 2806.5 – 2807 | 7 in | 7-inch long-range quads |
| 3110 – 3115 | 8–10 in | X-class, larger camera drones |
| 4010 – 5010 | 13–18 in | Mapping and inspection multirotors |
| 6010 – 8318 and larger | 20–30 in and larger | Heavy-lift and agricultural drones |
These are typical pairings. Always confirm with the manufacturer’s thrust data for your propeller and battery voltage.
How motor size and KV work together
Stator size tells you how much torque and power a motor can handle. KV tells you how fast it spins per volt. A bigger stator lets a motor turn a bigger propeller at a lower KV. For example, a 7-inch long-range quad might use a 2806.5 motor at about 1,300KV on 6S, while a 5-inch quad uses a 2207 at about 1,750–1,950KV on 6S. Learn more in Motor KV Explained.
Other things to check on a motor datasheet
- Weight: four motors add up quickly, especially on small drones.
- Maximum current and power: make sure your ESC can supply it with margin. See What Is an ESC?
- Shaft size and mounting pattern: must match your propellers and frame.
- Thrust table: thrust, current and efficiency (grams per watt) at different throttle levels for specific propellers.
- Bearings and build quality: good bearings and strong magnets last longer and reduce vibration.
How to choose the right motor size
- Choose the propeller size first, based on your frame and mission. See Drone Propellers Explained.
- Pick the motor size range that suits that propeller, using the table above as a starting point.
- Choose the KV to match your battery voltage.
- Check thrust: total thrust should be at least twice the drone’s take-off weight for stable flying, more for freestyle.
- Check efficiency at hover if flight time matters, and current at full throttle for your ESC.
Frequently asked questions
What does 2207 mean on a drone motor?
The motor’s stator is 22 mm in diameter and 7 mm tall.
Is a bigger motor always better?
No. A bigger motor is heavier. If it is larger than your propeller needs, the extra weight reduces flight time and agility.
What is the difference between 2207 and 2306 motors?
A 2207 has a narrower, taller stator; a 2306 is wider and shorter. They have similar volume and both suit 5-inch quads, but they can feel slightly different in torque and response.
What size motor do I need for a 7-inch drone?
Motors in the 2806.5 to 2807 range are common for 7-inch propellers, usually around 1,300KV on 6S.